Satellite TV is no longer a luxury and is found in many homes. Installing such a system has always been considered a complex process. Did you know how to install a satellite dish? It turns out that if you understand the installation technology, everything is not so difficult.
Let's try to analyze together how this process takes place.
How to choose a satellite?
Before purchasing satellite equipment from ledepotelectronique , for example, it is important to first select an operator. Satellite television operates using various orbiting satellites that capture signals from stations and transmit them to large areas of the Earth. The antenna detects the signal and then transmits it to the converter and then to the tuner. Only then does the decoding process take place, and a signal is already transmitted to the TV in the form of sound and images.
In order to receive a signal from a specific object, it is important to correctly set the reception frequency. To do this, you must know how to install a satellite dish yourself. Among the operators, you can choose from: Tricor TV, NTV, Plus or Raduga TV, etc.
You can also read: Formuler z alpha installation for the Internet
How to set up or install a satellite dish yourself?
Before installing a satellite dish yourself, let's first determine what this equipment consists of:
- a plate that perceives the wave and sends it to the converter. It is better if its diameter is greater than 90 cm;
- the head (converter) receives the message and transmits it to the receiver;
- the tuner receives the signal, decodes it and transmits it in a form understandable to the TV;
- the bracket allows for solid mounting of the antenna on the wall, allowing you to turn it in different directions;
- the cable is the conductor of the received signal. It connects the receiver and the converter;
- If you plan to receive multiple channels, the DiSEqC device is used, which allows the converters to be connected in a common cable.
Now, to set up and install a satellite dish, prepare the following tools: a drill, wrenches, a Phillips screwdriver, a hammer, and electrical tape.
You may also be interested in: How to use wireless headphones?
Install a satellite dish for a TV
To properly install the equipment, you need to know exactly where it should be directed. The Agsat.com.ua/satdirect service will help you do this. There, you need to specify a specific location for the equipment and select a satellite.
After these steps, the desired direction will be displayed on the screen. To find out the exact coordinates of the antenna installation location, use a directory or search on the internet. You will also need information about data transmission from the satellite . In this case, the location of the satellite on the horizon, as well as the transmitter frequency and maximum data transfer speed are important. Using search engines, you can find information about the transmitter.
In addition, it is important to correctly calculate the antenna tilt and rotation angles. This can be done manually or you can use special software applications. Such a service requires entering certain information: the position and name of the satellite, as well as geographic coordinates. The program also provides results in geographic form.
Therefore, fine-tuning the antenna device requires some preparation. So, prepare screwdrivers of different sizes, a set of cables , an extension cord, and several sockets for connecting the power supply. Before installing the system, make sure there is a signal. In this case, the antenna should be held in your hands. If everything is in order, the mount is installed. The perforator makes recesses for the anchors.
At the same time, their size is chosen taking into account the material of the wall and the mass of the structure. After fixing, you can mount the antenna.
Read also: x96 mini user guide: Correct configuration
How to configure the satellite tuner yourself after connection?
The antenna is tuned after being connected to the receiver. To do this, the wire is run from the converter to the tuner. The cable is installed as follows:
- the insulating layer of the cable is cut about 1.5 cm from the edge;
- the braid is curved outwards;
- the middle inner part of the wiring is freed from the sheet, then it is cleaned and put on the F-ka;
- in this case, the core must not exceed 2 mm;
- the same thing must be done with the other side of the cable;
- the cable is connected to the converter and the other side is pulled to the receiver.
Next, you need to make some settings. In this case, you need to know in advance how to configure different channels on a satellite dish yourself.
First, it is recommended to roughly tune the antenna. Then, a suitable satellite is selected in the receiver settings. Its characteristics must also be affixed. These are the frequency, polarization, and speed. This will display two bars on the screen of your smart TV . One shows that the plate has caught the desired wave, and the second displays the power. If the equipment is correctly installed, it should display at least 50% of the signal.
Next, you need to improve the quality. Here, some actions must be performed with a plate. It is important to note the changes on the signal scale. Therefore, it is best to configure the system with an assistant. It is worth starting by turning the device up and to the right. Then slowly turn the plate to the left. If the signal is not perceived, lower the antenna a few millimeters and move the dish. Adjustment involves finding a manual adjustment.
Also discover: Electronic deposit: the electronic store that propels you into the future!
How to set up a TV?
Finally, you need to search for the satellite channel content and set up the TV. In this case, the channels are arranged in a certain order, so it is convenient to search for them. If access is paid, you must use an unlock card.
Also read: How to configure IPTV on TVIP box?
Conclusion
Satellite dishes have so many advantages that more and more people are considering installing them. With the proper use of the tools and recommendations above, you can install a satellite dish without any worries.
Additionally, if you are looking for any other information beyond what is provided in this production, please do not hesitate to keep us informed in the comments or directly by phone contact in order to be satisfied. Thank you for your kind attention!
