The Mag 524w3 decoder is one of the best TV boxes with a huge range of features. Whether it's used for a modern or older TV , it works perfectly if it's configured correctly.
In this article, you will learn how to configure and connect the Mag 524w3 TV box in an easier way. Below you will find detailed step-by-step instructions for connecting and configuring the Mag 524w3.
Description and characteristics of the smart decoder 
The decoder fully meets the current needs of the IPTV market. You can enjoy high-quality video at 2160p 60fps and clear surround sound with built-in support for eight-channel Dolby Digital™ audio.
And HEVC support will significantly reduce network load, even when transferring 4K content. The set-top box can be connected to the Internet via the 100 Mbps Ethernet interface or using the built-in Wi-Fi receiver.
Characteristic
4K and HEVC Support : MAG 524w3 easily plays 4K videos. Thanks to the built-in HEVC (h.265) codec, UltraHD content is available even for users with slow internet connection speeds.
Dolby Digital Support : Built-in Dolby Digital™, supports 7.1-channel to 8-channel audio and delivers Hi-Fi sound even with compressed audio.
Reliability and Performance : Amlogic S905X2 chipset, 18400 DMIPS, powerful ARM Cortex-A53 processor and 1GB RAM make the device the best choice to run your IPTV / OTT project among competitors.
HDMI and USB outputs : you can connect various devices to the mag 524w3 that you need for more comfortable use of your decoder.
Housing design : The decoder and remote control are made in the ergonomic "Micro Fusion" design and fit perfectly into any interior.
Also discover: How to configure and connect on X96 mini?
Instructions to follow before starting the configuration of the IPTV box mag 524w3
Before using your Mag 524w3 decoder, you must have a Gmail account, your television must have an HDMI port, and an internet connection. To begin the setup, you must first plug in your decoder and connect it to the television using the HDMI cable provided.
In fact, configure your decoder's connection with the Ethernet cable in case you don't have an internet connection. Once the mag 524w3 is connected, turn on your receiver and go to the HDMI (High Definition Multimedia Interface) function. You are now on the verge of the actual configuration.
MAG mag 524w3: how to configure it?
First, you need to configure your Mag 524w3 with the remote control before starting the actual setup. To do this, you must first press and hold the Home and OK buttons on your set-top box remote control. Once this is done, you will have adjustment information about firmware and remote control updates on your TV display. Finally, you will be asked for instructions such as choosing the Wi-Fi network and selecting the local interface for the internet connection. Do this as you see fit to fully enjoy your Android receiver.
Also read : Smart set-top box MTS: make your TV smart at no extra cost
Connect Gmail
Following the previous instructions, you will now be asked to connect your Gmail account. However, there are two ways to do this. First, the mag 524w3 will present you with a code on your TV and direct you to android.com/setup.
Take the link that will be displayed and open it in Chrome or other browsers on your tablet or PC. In the section that will be presented, enter the code that was displayed on your TV and choose the email you want to use on your Android receiver and the rest will be done automatically.
Then you can do a manual setup. So, with the virtual keyboard, enter your Gmail password and name using the remote control.
Once the configuration is finalized, you will be directed to accept the use according to your liking.
This may also interest you: Formuler z plus neo: discover the ways to connect without embarrassment
How to control the screen length of mag 524w3?
What sets the MAG 524w3 apart from other smart set-top boxes is that it allows you to adjust the TV's screen length first and foremost. This is because not all TVs have 4K capabilities.
Some may not display all the decoder's features, just cutting them off, which is why you need to adjust the screen length before any secondary adjustment. To ensure everything is displayed correctly, ensure the alignment of the corner keys that are on the blue lines so that: upper right and lower left. Therefore, to control the screen size of this Android receiver, you must adjust it beforehand before configuration.
Conclusion
The mag 524w3 is a durable and high-performance device. Powered by Linux, it allows you to easily develop applications and offer integration and customization solutions. The decoder guarantees a high-quality user experience and works for months without rebooting.
Moreover, by purchasing a MAG524w3 IPTV decoder in the ledepotelectronique online store, you receive a quality guarantee and professional advice on all issues related to the operation of the decoder, not only during purchase, but also during further use of the equipment.
It's also possible to sell the mag 524w3 prefix wholesale. If you're a wholesale supplier or buyer, then this is a great deal for you! Also, if after reading this guide, any parts seem unclear, ask us questions in the comments or contact us directly for more details.
